TechnicalSpecifications
| Technical Specifications | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Alloy No | Temper designation | Tensile Strength (Mpa) | Elongation(%)min | Grain Size(µm) | Hardness | ||||
| Standard | Former | Vickers | Rockwell | |||||||
| W.T(mm) | Scale | Quantity | ||||||||
| ASTM | C12200 (DHP) | O60 | Soft Anneal | 205 min | 40 | 40 min | - | 0.381 to 0.889 | 15T | 60 max |
| 0.889 and over | F | 50 max | ||||||||
| O50 | Light Anneal | 205 min | 40 | 40 max | - | 0.381 to 0.890 | 15T | 65 max | ||
| 0.889 and Over | F | 55 max | ||||||||
| H58 | Drawn(general purpose) | 250 min | - | - | - | all | 30T | 30 min | ||
| EN |
Cu-DHP or
CW024A
|
R220 | Annealed | 220 min | 40 | - | 40-70 (HV5) | - | - | - |
| R250 | Half Hard | 250 min | 30a | - | 75-100 (HV5) | a |
Elongation≥30% when d≤66.7mm;and eighter e<1mm or d ∕ e2>24
Elongation≥20% when d≤66.7mm; or e≥1 and also d ∕ e2≤24 |
|||
| 20a | - | |||||||||
| R290 | Hard | 290 min | 3 | - | 100min (HV5) | - | - | - | ||
| Y040 | Light Annealed | 220 min | 40 | 15-40 | - | - | - | - | ||
| Y035 | Soft Annealed | 210 min | 40 | 30-60 | - | - | - | - | ||
| JIS H3300 | C1220 (DHP) | O | 205 min | 40 | 25-60 | 69max | HR15TS or HR15TW | 60 max | ||
| HRFS or HRFW | 50 max | |||||||||
| OL | 205 min | 40 | 40Max | 73max | HR15TS or HR15TW | 65 max | ||||
| HRFS or HRFW | 55 max | |||||||||
| 1/2H | 245-325 min | - | - | 70-110 | HR30TS or HR30TW | 30-60 | ||||
| H | 315 min | - | - | 100 min | HR30TS or HR30TW | 55 min | ||||